KILO System
Load-weighing and overload system for lifts — up to 800 kg, three relay thresholds, and live weight on Movilift serial displays over CAN.
- Load weighing
- Overload
- Safety
- CAN bus
- Made in Italy
- Max load
- 800 kg
- Versions
- 3
- Relay outputs
- 3
- Movilift serial
- CAN
Overview
Measures cabin load and trips relays at the full-load, overload and custom thresholds; shows live weight on the cabin display.
The KILO System is Movilift's lift load-weighing device, built around latest-generation load cells and designed and produced in-house in Italy. Its main job is load limitation: it measures the weight on the cell and trips a relay when the load exceeds each programmed threshold — full load (CMP), overload (OVL) and a settable custom level (AUX) — with a buzzer output on overload. Cabin capacity is up to 800 kg.
It comes in three versions for any installation — CARGO with sensors under the car, ROPES with sensors on the ropes, and CELL with a sensor on the car sling. A CAN-bus port lets it show the live weight directly on Movilift serial displays, and all three relays are freely configurable as normally-open or normally-closed. Setup and two-step calibration (zero, then sensitivity with a known weight) are done entirely from the on-board keys and 4-digit display.
Specifications
| Dimensions | 108 × 112 mm |
|---|---|
| Power supply | 12–24 VDC ±10% |
| Consumption | 40 mA typ. / 80 mA max |
| Max load | 800 kg |
| Relay outputs | 3 × 250 VDC, 3 A — programmable N.O./N.C. |
| Buzzer output | Transistor open-collector (on overload) |
| Hold input | 24–110 VDC |
| Analog output | 10 V |
| Sensor connection | 4× USB sensor ports |
| Sensor cable length | 3.5 m |
| Communication | Movilift serial CAN bus |
| Display | 4-digit 7-segment |
| Programming | On-board UP / DOWN / OK keys |
| Operating temperature | −15 °C to +50 °C |
| Storage temperature | −25 °C to +60 °C |
Variants & differences
| Variant | Cabinet | Dimensions | Notes |
|---|---|---|---|
| CARGO | – | – | Load sensors under the cabin |
| ROPES | – | – | Sensors on the ropes (6–12 mm) |
| CELL | – | – | Sensor on the car sling / arch |
Compatibility
Works with any Movilift controller: the CMP (full load), OVL (overload) and AUX relays wire into the manoeuvre controller, and the live weight is shown on Movilift serial displays (Marlin family) over the CAN bus. Three versions cover every installation — CARGO (under the cabin), ROPES (on the ropes, 6–12 mm) and CELL (on the car sling). Up to 800 kg cabin capacity; relays freely set N.O. or N.C.
- MoviLift serial (CAN)
Works with
BR20032-bit lift control mainboard for machine-room and MRL elevators — EN 81-20/50, built-in battery charger, UCM monitoring, RS232/USB programming.
BR400The most flexible mainboard: customizable inputs and functions, built-in encoder input, Bluetooth and Wi-Fi. Ideal for speeds up to 4 m/s.
Marlin 7"Marlin 7" cabin TFT display with custom graphics, voice announcements, CanBus or multi-parallel, calls included on the NET version. WIFI version available.
Software & updates
- Onboard keypad